KONFIGURASI ROUTER DENGAN 3 PC PADA Cisco Packet Tracer

Configurasi Router Dengan Tiga Komputer

1.Lakukan pengaturan IP CONFIGURASI pada PC-0, PC-1, PC-2

Isikan kolom ip configuration dengan format berikut :

Untuk PC-0 :

IP address 192.168.1.2 Subnet mask 255.255.255.0 Default Gateway 192.168.1.1

Untuk PC-1 :

IP address 192.168.2.2 Subnet mask 255.255.255.0 Default Gateway 192.168.2.1

Untuk PC-2 :

IP address 192.168.3.2 Subnet mask 255.255.255.0 Default Gateway 192.168.3.1

2. KONFIGURASIKAN ROUTER

Untuk router0 ikuti langkah berikut:

Router>enable

Router#configure terminal

Router(config)#hostname fedra1

Fedra1(config)#interface fastethernet 0/0

Fedra1(config-if)#ip address 192.168.1.1 255.255.255.0

Fedra1 (config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Fedra1(config-if)#exit

Fedra1(config)#

Fedra1(config)#interface serial 2/0

Fedra1(config-if)#ip address 192.168.4.1 255.255.255.0

Fedra1(config-if)#clock rate 64000

Fedra1(config-if)#bandwidth 64

Fedra1(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial 2/0,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 2/0, changed state to up

Fedra1(config-if)#exit

Fedra1(config)#

Fedra1(config)#ip route 192.168.2.0 255.255.255.0 192.168.4.2

Fedra1(config)#

Untuk router1 ikuti langkah berikut:

Router>enable

Router#configure terminal

Router(config)#hostname fedra2

Fedra2(config)#interface fastethernet 0/0

Fedra2(config-if)#ip address 192.168.2.1 255.255.255.0

Fedra1 (config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Fedra2(config-if)#exit

Fedra2(config)#

Fedra2(config)#interface serial 2/0

Fedra2(config-if)#ip address 192.168.4.2 255.255.255.0

Fedra2(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial 2/0,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 2/0, changed state to up

Fedra2(config-if)#exit

Fedra2(config)#

Fedra2(config)#interface serial 3/0

Fedra2(config-if)#ip address 192.168.5.1 255.255.255.0

Fedra2(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial 2/0,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial

Fedra2(config-if)#exit

Fedra2(config)#

Fedra2(config)#ip route 192.168.1.0 255.255.255.0 192.168.4.1

Fedra2(config)#

Fedra2(config)#ip route 192.168.3.0 255.255.255.0 192.168.5.2

Fedra2(config)#

Untuk router2 ikuti langkah berikut:

Router>enable

Router#configure terminal

Router(config)#hostname fedra3

Fedra3(config)#interface fastethernet 0/0

Fedra3(config-if)#ip address 192.168.3.1 255.255.255.0

Fedra3 (config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Fedra3(config-if)#exit

Fedra3(config)#

Fedra3(config)#interface serial 2/0

Fedra3(config-if)#ip address 192.168.5.2 255.255.255.0

Fedra3(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial 2/0,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 2/0, changed state to up

Fedra3(config-if)#exit

Fedra3(config)#

Fedra3(config)#ip route 192.168.2.0 255.255.255.0 192.168.5.1

Fedra3(config)#